Ars Marine - Headers for Jet Drive, V Drive, Water Injected, and Twist Style

EXHAUST

There are several different types of water injected Headers available. These are just a Few of the many that are offered. If you don’t see what you’re looking for, please call us for Price and availability.

Jet Headers have a higher collector angle than V Drive headers to compensate for the difference in mounting angle of the engine. The Primary Tube size is 2 1/4”, the collector size is 4” (Long collector headers flare to 5 1/8” at the end).

Headers Include Bolts, Gaskets, Injection Lines, And a 126123 Tee valve.

	Round Wet Manifold Gasket #R 470103 Round (wet) manifold gasket (jet) $6.30 each
	Chevy BBC Exhaust Gaskets #R 470107 Chevy Big Block $16.50 pair
	Chevy SBC Exhaust Gaskets #R 470109 Chevy Small Block $16.50 pair
	Olds 455 Exhaust Gaskets #R 470110 Olds 455 $16.50 pair
	Ford 429-460 Exhaust Gaskets #R 470111 Ford 429-460 $17.50 pair
	Basset SBC Exhaust gasket kit #R 126180 Basset Gasket Kit-Small Block Chevy-Set of four $42.00
	Rewarder Headers (Regular Style Water Injected) #126202 454 Chevrolet Jet – Short Collectors $950.00 #126203 454 Chevrolet Jet –Long Collectors $950.00 #126206 350 Chevrolet Jet – Short Collectors $1050.00 #126207 350 Chevrolet Jet –Long Collectors $1050.00
	Headers (Regular Style Water Injected) #126200 454 Chevrolet V Drive-Short Collectors call for pricing #126201 454 Chevrolet V Drive-Long Collectors call for pricing #126204 350 Chevrolet V Drive-Short Collectors call for pricing #126205 350 Chevrolet V Drive-Long Collectors call for pricing
	Headers (Regular Style Water Injected) #126210 460 Ford-Jet Short Collectors call for pricing #126211 460 Ford-Jet Long Collectors call for pricing #126214 455 Olds-Jet Short Collectors call for pricing #126215 455 Olds-Jet Long Collectors call for pricing
	Headers (Twist Style Water Injected) These Headers Feature a low, sleek, twisted tube configuration. They angle in slightly closer to the engine than the regular style headers listed above. Primary tube size is 2 1/4”, collector size is 4” and the collectors are long. These headers include Bolts, Gaskets, Injection Lines, And a 126123 Tee valve. #126114 454 Chevrolet-V Drive call for pricing #126115 454 Chevrolet-Jet call for pricing #126117 460 Ford-Jet call for pricing
	Headers (Blower Style Water Injected) Dry headers are available by special order.These headers are designed for the high exhaust flow encountered in blown engines used in recreational applications. These headers are water injected and feature large 2 1/2" primary tubes and 4 1/2" Short collectors, They include Bolts, Gaskets, Injection Lines, And a 126123 Tee valve. #126130 454 Chevrolet-V Drive call for pricing #126131 454 Chevrolet-Jet call for pricing
	Header Covers #R164102 Bassett 5 1/8" tapered collector cover $32.00 pair #R164103 Bassett 4" collector cover $32.00 pair
	Exhaust (Block Offs) Transom cover plates can be used when exhaust ports are removed to install over the transom exhaust. The plates cover the holes in the transom. Our plates are the finest available. They are machined out of 6061 aluminum Plate, not castings. The outside plates are 5 1/2" in diameter to cover the largest of exhaust ports; the inner plate is 4” in diameter. The outside plate is threaded on the back side, to install you merely sandwich the transom of the boat between the plates. No Fiberglass Work No Hassles. If you ever decide to change your exhaust back, just take the plates off, and you’re ready .#R457300 Transom cover Plates $98.00
	Economy mufflers These 100% Stainless steel mufflers fit inside 4.0" header collectors. Defiantly takes some of the Bark out of the LOUD headers without restricting flow. Sold in Pairs $124.99
	Header (Mufflers) These High Performance Mufflers feature, large stainless steel packed louvered design cores for maximum performance through a muffler system. They are sold in Pairs only. They are 100% Stainless steel construction. They fit inside 4” collectors and install with 1 bolt. A spacer is included for use long tapered collectors .#R126132 High performance mufflers (Pair) $175.00
	Exhaust (Hose) Heavy duty hose for wet exhaust service. Multiple ply construction with reinforcement for good flexibility and resistance to collapse. Meets all USCG Standards for Recreational Boating. #387115 2 7/8” I.D. $15.00 per foot #387118 3 1/2" I.D. $18.50 #387119 4” I.D. $19.75
	Powder Coated Exhaust Ports Thru-transom exhaust ports are epoxy powder coated black for maximum durability. Hose connection ends are ring-grooved to ensure a secure water-tight seal. They also include Salisbury exhaust guard flaps, to prevent water from entering engine due to bachwash. Fits 2-7/8" I.D. Hose. Sold individually. $109.50
	Flapper Trumpet Exhaust Port Built-in flapper to prevent water from entering the engine on the low freeboard and deep-vee hulls. .#GLE 750 Polished aluminum 2 7/8" hose size $67.50 each
	Rubber Flappers Salisbury Style The most widely used method of preventing engine backwash. Sold individually. $44.50
	Replacement Flaps Replacement Flaps for Trumpet exhaust ports. Includes Rubber flap, Screws & Stainless plate. Sold Individually. $4.99
	Chevy Exhaust Manifold (Glenwood ) 396-427 & 454 cu. in. Big Block chevy. Cast aluminum high performance exhaust manifolds. Sold in Pairs! $659.00
	SBC (Glenwood Exhaust Manifolds) $659.00
	Over Transom Header Pipes Designed for use on Round Exhaust manifolds. Available in 7"-12"-15"-18"-21" Rise $594.99
	Exhaust Risers (Glenwood ) For use with Glenwood high performance exhaust manifolds. These high performance risers are water jacketed, and feature a full 3"exhaust outlet. Sold in Pairs! $678.00
	Glenwood Straight water cooled outlets Ideal for conventional direct inboard engine applications (Tournament type ski boats and some Jets) Sold in Pairs. $185.00
	Glenwood XL 35 water cooled elbows Designed for engine installations close to transom (Stern drives and some Jets ) Sold in Pairs! $235.00